6 sourced reports, with what to check before you buy. Each one links to the page it was reported on.
Costly or dangerous
674532 EB shows error indicator on first plug-in after installation rest
Owner complaint on ŞikayetVar (query: 'Beko 674532 EB sorun arıza'). A new 674532 EB Kombi NF showed an error indicator immediately when first plugged in after the required 6-hour rest; Beko only logged the call, and the owner requested a return as a defective unit. This is a first-use electrical/control-board failure on this model.
What to check. Test the unit at first plug-in; if an error indicator appears immediately, document it and insist on an exchange under the defective-product rules rather than accepting a repair.
674532 EB shows fault indicator on first plug-in (day one)
Owner Şeyma reports the new 674532 EB showed a fault indicator immediately on first plug-in and demanded a refund.
What to check. If you buy this model, test it on first plug-in and keep the receipt; a day-one electrical fault is documented and the owner had to push for a return.
674532 EB runs loudly from day two; traced to refrigerant pipes touching
Owner complaint on ŞikayetVar (query: 'Beko 674532 EB buzdolabı şikayet'). Loud operation began 2 days after delivery, escalated from 10-20 min to 60 min of noise, and was initially dismissed as normal motor sound; a later service visit attributed it to refrigerant pipes touching and fixed it. Buyer should expect possible noise complaints and repeated service visits.
What to check. Before buying, verify the unit is quiet on delivery and be ready to insist on a service visit that checks pipe contact, not just the motor.
674532 EB runs very loud from new, unresolved after 3 service visits
Owner Selman reports loud operation within the first week; three service visits and a board software re-flash did not fix it.
What to check. Loud operation on a new unit is a recurring complaint for this model; a software re-flash may not fix it, so ask for a replacement early.
674532 EB main electronic control board is a real replaceable part (Beko 7281620217)
Parts catalog confirms the 674532 EB uses a main electronic board (Beko code 7281620217; board 5929763600) that controls compressor, fan, sensors and lighting; the same board is also listed on penguensogutma.com for this model.
What to check. If the unit shows electrical faults, the control board is the concrete part a repairer will replace; it is a stocked, priced spare for this model.
These reports come from the pages linked under each item: owner forums, repair guides and workshops. They are not a diagnosis of any one unit, and a careful check of the one you are buying still applies.
Text from the Kriko Refrigerators catalog, version 0.1.1, under the CC-BY-SA-4.0 license.
